Fig. 1
(A) Precontoured locking plate for distal clavicle (3.5 mm LCP superior clavicle plates; Synthes, Oberdorf, Switzerland). (B) A 2.4 mm volar distal locking plate (2.4 mm LCP Distal Radius System; Synthes) can provide variable options for screw position at the distal clavicle end compared to conventional precontoured locking plate for distal clavicle.
Fig. 2
(A) Original shape of 2.4 mm volar distal radius locking plate. (B) After neutralization of volar angle and making a curved shape from the straight distal end of 2.4 mm volar distal radius locking plate.
Fig. 3
(A) Preoperative clavicle anteroposterior view of a 41-year-old male shows a Neer V unstable distal clavicle fracture. (B) Intraoperative fluoroscopic image. Cerclage wires were used to stabilize the inferior fragment of the distal clavicle, which is the insertion site of the coraco-clavicular ligament. (C) Intraoperative fluoroscopic image. Short distal fragment could be stabilized by 2.4 volar locking plate for distal radius.
Fig. 4
(A) Preoperative clavicle anteroposterior (AP) view of a 46-year-old male shows a Neer V unstable distal clavicle fracture. (B) Immediate postoperative clavicle AP view of tension band wiring addition to plate fixation. (C) Postoperative four months clavicle AP and apical view shows solid union of the fracture site.
Fig. 5Measurement of Coracoid-clavicle distance. Coracoidclavicle distance (C) was measured by two parallel lines at the inferior border of the distal clavicle (B) and superior margin of the coracoid process (A).
Fig. 6
(A) Preoperative radiograph of a 42-year-old male shows a Near V unstable distal clavicle fracture. (B) At postoperative 5 months, acromio-clavicle joint dislocation developed as a complication. (C) Removal of plate and distal clavicle resection was performed as a salvage operation.
Table 1Summary of the Patients