Journal of Musculoskeletal Trauma

Usefulness of Reduction and Internal Fixation Using a 2.4 mm Hand Plating System in Type AO 33-A3 Distal Femur Fracture - Technical Note -: Bong-Ju Lee, Ja-Yeong Yoon, Seungha Woo; J Korean Fract Soc 2023;36(1):25-28. Published online January 31, 2023; DOI: https://doi.org/10.12671/jkfs.2023.36.1.25

Abstract PDF: Open reduction in an AO 33-A3 class distal femur transverse and comminuted fracture is often difficult due to frequent reduction loss during surgery, leading to longer operative time and increased blood loss intra-operation. In this study, the authors report a case in which the use of an offset grid plate (OsteoMed, USA) using 2.4 mm HPS (hand plating system) eased the process of fracture reduction and achieved a stable internal fixation, ultimately leading to successful osteosynthesis. The authors experienced no need for temporary fixation devices such as K-wires or screws, which are otherwise required to stabilize the reduction. The fracture reduction was stable throughout the primary fixation of the fracture using a locking plate and screws. The authors report that the advantage of the HPS plate is fitting into the cortical contour and providing stable maintenance of fracture reduction intra-operation, which would be beneficial in certain distal femoral fracture patterns.

34 View
1 Download

Use of Miniplate for Severe Comminuted Metadiaphyseal Fractures of the Distal Radius: Jong Ryoon Baek, Yong Cheol Yoon, Seung Hyun Baek; J Korean Fract Soc 2019;32(4):204-210. Published online October 31, 2019; DOI: https://doi.org/10.12671/jkfs.2019.32.4.204

Abstract PDF: PURPOSE
This study investigated the clinical and radiological outcomes of patients undergoing provisional fixation in conjunction with locking plate fixation. Miniplates were used as the reduction plates for the surgical treatment of severe comminuted metadiaphyseal fractures with an intra-articular fracture of the distal radius.
MATERIALS AND METHODS
The radial length, radial inclination, volar tilt, and radial intra-articular step-off were measured preoperatively, postoperatively, and at one year after surgery in 12 patients (eight males, four females, mean age 55.4 years old). The patients underwent volar locking plate fixation with miniplate as a reduction plate for severe comminuted metadiaphyseal fractures with an intra-articular fracture of the distal radius. Clinical evaluations were conducted using the modified Mayo wrist score (MMWS).
RESULTS
Bone union was achieved in all cases. The mean MMWS was 81.8 points, including two excellent, three good, and seven fair cases. Radiological improvements were observed in the average radial length (preoperative, 6.4 mm; postoperative, 11.8 mm), average radial inclination (10.2Â° to 22.4Â°), average volar tilt (âˆ’4.5Â° to 10.6Â°), and average radial intra-articular step-off (4.8â€“0.8 mm) (all, p<0.05). Radiographic measurements obtained immediately after surgery and at the final follow-up revealed insignificant decreases in radial length (0.6 mm), radial inclination (0.4Â°), and volar tilt (0.9Â°) (all, p>0.05).
CONCLUSION
Miniplate fixation can be an effective treatment option as a reduction plate for the treatment of distal radial fractures, which is challenging to reduce and maintain due to severely comminuted metadiaphysis fractures with the intra-articular fracture.

32 View
0 Download

The Operative Treatment of Radial Head or Neck Fracture: The Sub-classification of Mason Type II Fracture: Hyun Dae Shin, Kyung Cheon Kim, Se Min Woo, Yong Bum Joo, Dong Kyu Kim; J Korean Fract Soc 2006;19(4):449-453. Published online October 31, 2006; DOI: https://doi.org/10.12671/jkfs.2006.19.4.449

Abstract: PURPOSE
To evaluate the results of treatment according to the sub-classification of the Mason type II fracture.
MATERIALS AND METHODS
From 1999 to 2003, according to the sub-classification of the Mason type II fracture, 33 patients were treated with miniplate in displaced neck fracture (IIa), with compression screw in displaced head fracture (IIb), with miniplate and/or compression screw in displaced head and neck fracture (IIc), with compression screw and miniplate in comminution fracture (III) or excision of head in irreducible state. The clinical results were evaluated by An and Morrey's functional rating index.
RESULTS
Functional rate score averaged 92.7 in type IIa, 88.4 in IIb, 86.4 in IIc, 83.5 in type III with reduced fracture, 75.0 in type III with excised head, and 75.5 in type IV. Complications included heterotopic ossification (2 cases), metal loosening (1 case), malunion (1 case), partial ankylosis of elbow (3 cases), posttraumatic arthritis (1 case).
CONCLUSION
These results supported the recommendation for internal fixation with compression screw in isolated radial head fracture (IIb) and with miniplate in fracuture combined with displaced neck (IIa, IIc, indicated some III). We concluded that sub-classification is useful for dicision making in radial head or neck fracture's treatment.

26 View
0 Download

Operative Treatment of Metacarpal Shaft Fracture>: Comparision of Low-Profile Miniplating System and Kirschner Wire Fixation: Hyun Dae Shin, Kwang Jin Rhee, Kyung Cheon Kim, Ho Sup Song; J Korean Fract Soc 2005;18(2):105-109. Published online April 30, 2005; DOI: https://doi.org/10.12671/jkfs.2005.18.2.105

Abstract PDF: PURPOSE
To compare Kirschner wire fixation and low profile miniplating system in metacarpal shaft fracture.
MATERIALS AND METHODS
Patients, available at least 1 year, who received the operative treatment after being diagnosed as metacarpal shaft fracture from 1997 May to 2003 May were the subjects with the exclusion of thumb fracture and intraarticular metacarpal bone fracture and also cases involving Kirschner wire fixation on severe laceration or open fracture. On the last follow up total action motion (TAM) and plain radiographes was checked.
RESULTS
In 7 cases (38.9%) where closed reduction and Kirschner wire fixation were carried out, 8 cases (61.5%) where open reduction and Kirschner wire fixation were carried out and 24 cases (88.9%) where open reduction using miniplate and screw showed either excellent or good results on TAM. 5 cases of dorsal angulation occured in closed reduction and Kirschner wire fixation group and 4 cases of dorsal angulation in open reduction and Kirschner wire fixation group however no cases of dorsal angulation occured in open reduction and miniplate and screw fixation group, and in all cases no rotational deformity, complications through ulnar or radial angulation occured. Internal fixation was carried out on 2 cases of nonunion which had closed reduction and Kirschner wire fixation carried out, while the rest all showed bony union.
CONCLUSION
Selective use of low profile miniplate and screw fixation in the metacarpal shaft fracture is more effective than in cases of comminuted fracture which can not be achieved firm fixation by Kirschner wire fixation. Low profile miniplate and screw fixation can get more precise anatomical reduction and firm fixation so it allow early return to daily living activity and show low complication rate.

24 View
0 Download

Usefulness of Miniplate Fixation for the Fractures of Metacarpal and Phalangeal Bones of the Hand: Ig Gon Kim, Jae Hyek Kim, Chul Hyun Kim, Chul Hong Park; J Korean Soc Fract 1997;10(1):156-163. Published online January 31, 1997; DOI: https://doi.org/10.12671/jksf.1997.10.1.156

Abstract PDF: Before the introduction of internal fixation, the healing of a fracture was an unpredictable event. Internal fixation provides stability, and fractures heal predictably. The miniplate is used for unstable metacarpal and phalangeal fractures of the hand to provide stability and to allow early motion. We analysed 32 patients, 41 cases of metacarpal and phalangeal fractures of the hand which were treated with miniplates from Jan. 1990 to June 1995. The following results were obtained. 1. Mean age was 35 years and the male was predominent(81.3%). The most common fracture site was the metacarpal(51.2%). 2. TAM(total active motion) was 2240 in average and the best result was obtained in the metacarpal fractures(TAM = 239). The roentgenographic union was 16.8 weeks in average. 3. There were 6 complications(complication rate 14.6%) which were 3 cases of joint stiffness, a case of wound infection, a case of loss of reduction, and a case of delayed union. 4. Miniplate fixation is considered to be an useful method to get fracture union and good range of motion with low complication rate in the treatment of metacarpal and phalangeal fractures of the hand.

16 View
0 Download

Miniplate and Miniscrew Fixation for the Metacarpal and Phalangeal Fractures: Bu Hwan Kim, Jong In Yim, Deog Jeong Kang; J Korean Soc Fract 1997;10(1):150-155. Published online January 31, 1997; DOI: https://doi.org/10.12671/jksf.1997.10.1.150

Abstract PDF: The functional end result is more important than fracture healing in the hand fracture treatment. Accurate open reduction and internal fixation with miniplate and miniscrew for metacarpal and phalangeal fractures of hand provides firm fixation and allows early postoperative mobilization which reduce the incidence of joint stiffness and tendon adhesion. The authors have reviewed 17 cases of metacarpal and phalangeal fractures of the hand in 13 patients which were treated with miniplate and miniscrew fixations in the department of orthopaedic surgery, Dae Dong General Hospital from Mar. 1994 to Feb. 1996. The following results were obtained. 1.The firm fixation allowed range-of-motion exercises in most patients between 3-14 days. 2.The roentgenographic union was obtained within 14.8 weeks in average. 3.The mean TAM(total active motion) range at last follow up was 247 in the metacarpal fracture and 226 in the phalangeal fracture. 4. The complications(tendon adhesion & loss of reduction) occurred in 2 cases(11.8%). In conclusion, fixation with miniplate and miniscrew for metacarpal and phalangeal fractures of the hand is considered to be an effective method in the treatment of metacarpal & phalangeal fractures.

24 View
0 Download

Search